Just another poser pretending to be a legitimate tech. Using Noctua paste on a bare die tells me everything I need to know about your knowledge, or rather lack thereof, in this field. NT-H1 & NT-H2 are some of the absolute worst thermal compounds you can use on a bare die. It pumps out in less than 6 months. The card was better before you touched it.
G
graciela_morales4 months, 1 week ago
Reloading your GPU is faster then repasting it.
olivierdrift984 months, 1 week ago
Do this only if you are getting very high temps. Otherwise don't open it, thermal putty is good but hard to remove and apply again right. If card is behaving normal leave it and enjoy.
J
joshuaplume844 months, 2 weeks ago
Your making it looks easy but it's very nervousing especially if it an expensive gpu
D
daniela_campos4 months, 1 week ago
Repasting/padding is generally done for old GPUs, like 4+ years old. It should not be needed for a GPU as recent as the 9070 XT. Either your GPU is defective or you did an unnecessary 'upgrade'.
M
matthewpalmer7204 months, 2 weeks ago
I have a solid suspicion that the 50 series gigabyte cards "advanced" thermal interface was really just a cheaper and quicker process that shot them in the foot when it started dripping out
A
amanda.knight4 months, 2 weeks ago
I would rather use PTM7950 instead of past, the PTM7950 does not squeeze out over time and is said to last 2 to 3 years before reapplication is required. Same goes for Laptops.
ashleyjames9854 months, 2 weeks ago
Please use thermal pad on vram, vrm, and mosfet also make sure the thickness and size match for the chip
S
sergioserna5994 months, 2 weeks ago
This year. Marked as the first time ever I tried repasting my own gadgets. From my Speaker's Transistors even the Laptop's Processor It's tricky but I succesfully do that 😅
christine_woods4 months, 1 week ago
Seeing IPA loosen up and wash away old paste is like ASMR for my eyes and soul
B
brendanhollow274 months, 2 weeks ago
Please go with PTM 7950 next time so you don't have to repaste the GPU ever again
M
marcelladörschner4834 months, 1 week ago
Bro has a gpu gun before gta 6💀💀
R
rebeccareynolds8954 months, 1 week ago
This is putty on the vram and vrms, use UTP-8 from Upsiren and PTM7950 for the bare gpu die. You will have much better temps
Bro reloaded a GPU
Just another poser pretending to be a legitimate tech. Using Noctua paste on a bare die tells me everything I need to know about your knowledge, or rather lack thereof, in this field. NT-H1 & NT-H2 are some of the absolute worst thermal compounds you can use on a bare die. It pumps out in less than 6 months. The card was better before you touched it.
Reloading your GPU is faster then repasting it.
Do this only if you are getting very high temps. Otherwise don't open it, thermal putty is good but hard to remove and apply again right. If card is behaving normal leave it and enjoy.
Your making it looks easy but it's very nervousing especially if it an expensive gpu
Repasting/padding is generally done for old GPUs, like 4+ years old. It should not be needed for a GPU as recent as the 9070 XT. Either your GPU is defective or you did an unnecessary 'upgrade'.
I have a solid suspicion that the 50 series gigabyte cards "advanced" thermal interface was really just a cheaper and quicker process that shot them in the foot when it started dripping out
I would rather use PTM7950 instead of past, the PTM7950 does not squeeze out over time and is said to last 2 to 3 years before reapplication is required. Same goes for Laptops.
Please use thermal pad on vram, vrm, and mosfet also make sure the thickness and size match for the chip
This year. Marked as the first time ever I tried repasting my own gadgets. From my Speaker's Transistors even the Laptop's Processor It's tricky but I succesfully do that 😅
Seeing IPA loosen up and wash away old paste is like ASMR for my eyes and soul
Please go with PTM 7950 next time so you don't have to repaste the GPU ever again
Bro has a gpu gun before gta 6💀💀
This is putty on the vram and vrms, use UTP-8 from Upsiren and PTM7950 for the bare gpu die. You will have much better temps
质量好的putty导热效率高于pad，而且更不容易给显存压力，也不用考虑厚度是否合适。绝大部分显卡不推荐自己改散热。我以前觉得拆个显卡换散热没什么大不了的，直到看多了修显卡的视频才知道人可以有多么手残。
You should also mention that it's INCREDIBLY easy to mess up your GPU while doing this.
Bro if I had a 4090 or smth, I would guard that with my life and not even let a hydrogen molecule touch it, let alone open it😂
I myself dumped an entire 2 tubes of past onto the gpu and the temps where great
Totally unnecessary until you’re ruuning the gpu for over 4-5 years. Then consider doing it.
how am i to stay tuned for the pad part when the video ends?