This is what happens when you have a boring shift, you happen to see 2 tools sitting next to each other and have that lightbulb moment.
M
maríadelcarmenuribe8011 week, 3 days ago
No sir you did not sin, you took it off. It would be an issue if you used it to put one on. 😂 Edit* wow thx for 2k likes guys!
joshuachen2825 days, 5 hours ago
“if i’m not meant to do it, why does it fit?” immediately discovers at least three different reasons not to do it
V
victoire_chrétien1 week, 3 days ago
Valid argument nowadays.
C
colleen_woodard1 week, 3 days ago
Almost did this to a ford once, the oil filter on there so tight it took a 24" breaker bar with a 3 jaw filter wrench plus an additional 2ft of cheater pipe.
keith_davis3 days, 4 hours ago
I had an oil change come back on me one time because the filter was too loose and it leaked. Boss told me to make sure they where tight. 6 months later people start checking who put these filters on last because the WILL NOT COME OFF. Boss told me I was doing a good job.
E
ericarguello2661 week, 3 days ago
My dumbass thought the entire oil pan fell off haha
C
christopherharper9551 week, 3 days ago
Glad you got covered in oil after that tbh
K
kamilly_sousa1 week, 3 days ago
Lmao great content! +1 for the tool box being in a bad spot
L
laurie.morgan1 week, 4 days ago
dont mind the massive leak
caitlin_macdonald4 days, 8 hours ago
the "ah" at the end... ah, thats why 😂
C
crystal_ramirez1 week, 1 day ago
that one dude who made a 5 part video to get his filter off is shaking rn
gerolfechoing176 days, 15 hours ago
The moment it starts moving, stop and try again manually Had to do this on a 2010 Nissan frontier I swear whoever put it on last, did not intend for it to be serviced again Broke a breaker bar and a ratchet, in the mean time someone went to buy another breaker bar I tried this and the moment I saw it move a little I stopped Was enough to remove it but dang it made me struggle
U
udarshsolara373 days, 1 hour ago
Way back when I was a mechanic I was turning Spanish for five years and I never once used a power tool. It was all hand tools no pneumatics actually that’s a lie. We had pneumatics for pressurising tires that was it. That was the only attachment for the airline everything else was hand tools and a scaffolding bar. If you know you’re a real one
J
joe_hammond2 days, 16 hours ago
“If I’m not meant to do it, why does it fit?” Bro had a wild time in adolescence
J
josué_costela1 week, 1 day ago
Same was being said during installation 😂
D
dalton_gentry3 days, 16 hours ago
I appreciate your intrusive thoughts winning so I know what thats like but you gotta do the clean up
That. That is why.
He let the intrusive thoughts win
This is what happens when you have a boring shift, you happen to see 2 tools sitting next to each other and have that lightbulb moment.
No sir you did not sin, you took it off. It would be an issue if you used it to put one on. 😂 Edit* wow thx for 2k likes guys!
“if i’m not meant to do it, why does it fit?” immediately discovers at least three different reasons not to do it
Valid argument nowadays.
Almost did this to a ford once, the oil filter on there so tight it took a 24" breaker bar with a 3 jaw filter wrench plus an additional 2ft of cheater pipe.
I had an oil change come back on me one time because the filter was too loose and it leaked. Boss told me to make sure they where tight. 6 months later people start checking who put these filters on last because the WILL NOT COME OFF. Boss told me I was doing a good job.
My dumbass thought the entire oil pan fell off haha
Glad you got covered in oil after that tbh
Lmao great content! +1 for the tool box being in a bad spot
dont mind the massive leak
the "ah" at the end... ah, thats why 😂
that one dude who made a 5 part video to get his filter off is shaking rn
The moment it starts moving, stop and try again manually Had to do this on a 2010 Nissan frontier I swear whoever put it on last, did not intend for it to be serviced again Broke a breaker bar and a ratchet, in the mean time someone went to buy another breaker bar I tried this and the moment I saw it move a little I stopped Was enough to remove it but dang it made me struggle
Way back when I was a mechanic I was turning Spanish for five years and I never once used a power tool. It was all hand tools no pneumatics actually that’s a lie. We had pneumatics for pressurising tires that was it. That was the only attachment for the airline everything else was hand tools and a scaffolding bar. If you know you’re a real one
“If I’m not meant to do it, why does it fit?” Bro had a wild time in adolescence
Same was being said during installation 😂
I appreciate your intrusive thoughts winning so I know what thats like but you gotta do the clean up
Valid way, but why is it so tight?